6 1/4" 81" Stroke - 4 3/4" Rod Cylinder
|
|
Dump Angle is 52° on Both Hoists
|
Interchangeable Cylinders
|
|
High Tensile - one piece full length Dividing Bar
|
Single Stage Cylinders minimize problems. Rated at 3,000 PSI
|
|
Positive but single Container Lock for both Inside and Outside Roller Containers
|
Rollers have outside Bracket for 3 Point Shaft Support
|
|
Heavy Duty Bumper - meets ICC Requirements
|
Outside Rollers have Bronze Bushing & Grease Fittings
|
|
7 GA. Diamond Plated Fenders
|
All Grease Fittings on Outside of Hoist Frame
|
|
Integral Rear Sealed Lights
|
1/2" Plate Steel Hinge/Chassis and Cylinder Mounting Plates
|
|
Cast Alloy Steel Universal Cable Hook Standard
|
2 1/2" Rear Hinge Pin with 1 1/4" Support Plates
|
|
44" long Rear Guide Angle with Rear Hold Down
|
Main Tube Frame is 1/2" wall x 4" x 8" . ASTM A500-GRADE. C-50,000# Yield Main Frame
|
|
Weight of Hoist - mounted, with oil, 8200 lbs.
|
Roller Pin Holes are Burned in the Main Frame
|
|
Low Cylinder Mounting Plates bent around truck frame to reduce shifting of Plates and stress on bolts
|
Full Sub-Frame - 1/4" Tube - Factory Piped
|
|
Solid Steel Upper Cylinder Mounts and Rear Pivot Blocks
|
Unit Factory Tested at 60,000 lbs.
|
|
All Grease Points accessible with frame lowered on truck chassis
|
| Cable |
7/8" x 75' 0"
6 x 25 IWRC,
EIPS, 79,000 lbs.
Breaking Strength |
| Cable Hook End< hook cable> |
Hook w/Steel
Swaged Button |
| Cable Anchor End |
2" Thick Steel Eye
w (5) U-Chips |
| Cable Travel |
26' - 8" |
| Free Cable |
4' - 4" |
| Cable Sheaves |
5-10" Dia. with
Bronze Bushing |
| Max. Dump Angle |
52° |
| Outside Rollers |
(10) 4" O.D. with
Bronze Bushing |
| Rated Capacity Weight |
60,000
8200 lbs. Mounted
with oil |
| Operating Pressure |
1900 PSI |
| Oil Tank Capacity |
60 Gal. |
| Total Oil in System |
80 Gal. |
| Oil Pump Spec. |
27 GPM @ 1200 RPM
42 GPM @ 1800 RPM |
|
|
|
|
| Oil Filter Spec. |
50 GPM @ 200 PSI
(on return line)
replaceable cartridge
& pressure gauge
|
| Control Valve Spec. < hook cable> |
50 GPM 2 Spool
Commercial
|
Cylinders - Lift & Reeving
Cylinder |
6 1/4" Bore x 81"
Stroke, 4 3/4" Rod,
Single Stage, Double,
Acting
|
| Hoist Up |
26 Seconds
|
| Hoist Down |
21 Seconds
|
| Winch On |
21 Seconds
|
| Winch Off |
26 Seconds
|
| Hoist Frame |
4" x 8" x 1/2" Tubing
(one piece)
|
| Sub Frame |
3" x 4" x 1/4" Tubing
(one piece)
|
| Top Rail Dividing Bar |
3/4" x 2 1/2" Alloy Steel
(one piece)
|
| Lubrication |
Zerte Fittings at all
Wear Points
|
| Inside Frame |
34"
|
| Outside Frame |
35 1/2" |
|
|
|
HOIST SPECIFICATIONS
|
|
HRP-50 O/R EXT. |
HRP-60 O/R |
HRP-60 O/R 24 |
HRP-60 I/O |
HRP-75 O/R |
HRP-75 O/R 24 |
HRP-75 I/0 |
HRP-75 O/R 10 |
RATED CAPACITY |
50,000 LBS. |
60,000 LBS. |
60,000 LBS. |
60,000 LBS. |
75,000 LBS. |
75,000 LBS. |
75,000 LBS. |
75,000 LBS. |
LIFT CYLINDERS (BORE x STROKE x ROD) |
601/4” x 81” x 4-3/4” D.A. |
6-1/4” x 81” x 4-3/4” D.A. |
6”, 5”, 4” x 120” D.A.T. |
6-1/4” x 81” x 4-3/4” D.A. |
7-1/4” x 81” x 4-3/4” D.A. |
6”, 5”, 4” x 120” D.A.T. |
7-1/4” x 81” x 4-3/4” D.A. |
7-1/4” x 81” x 4-3/4” D.A. |
REEVING CYLINDERS (BORE x STROKE) |
6-1/4” x 81” x 4-3/4” D.A. |
6-1/4” x 81” x 4-3/4” D.A. |
6-1/4” x 81” x 4-3/4” D.A. |
6-1/4” x 81” x 4-3/4” D.A. |
7-1/4” x 81” x 4-3/4” D.A. |
7-1/4” x 81” x 4-3/4” D.A. |
7-1/4” x 81” x 4-3/4” D.A. |
7-1/4” x 81” x 4-3/4” D.A. |
TAIL CYLINDERS (BORE x STROKE x ROD) |
3-1/2” x 80” x 2-1/2” D.A. |
N/A |
N/A |
N/A |
N/A |
N/A |
N/A |
N/A |
CABLE |
7/8” x 75’9” (6x25 IWRC,EIPS 79,600 LBS.) |
7/8” x 75’9” (6x25 IWRC,EIPS 79,600 LBS.) |
7/8” x 75’9” (6x25 IWRC,EIPS 79,600 LBS.) |
7/8” x 75’9” (6x25 IWRC,EIPS 79,600 LBS.) |
7/8” x 75’9” (6x25 IWRC,EIPS 79,600 LBS.) |
7/8” x 75’9” (6x25 IWRC,EIPS 79,600 LBS.) |
7/8” x 75’9” (6x25 IWRC,EIPS 79,600 LBS.) |
7/8” x 75’9” (6x25 IWRC,EIPS 79,600 LBS.) |
HOIST LENGTH |
238” - 318” |
276” |
286” |
276” |
276” |
286” |
276” |
276” |
CONTAINER LENGTH |
12’ - 22’ |
12’ - 22’ |
12’ - 22’ |
12’ - 22’ |
12’ - 22’ |
12’ - 22’ |
12’ - 22’ |
12’ - 22’ |
OPERATING PRESSURE |
2150 |
2150 |
2150 |
2150 |
2150 |
2150 |
2150 |
2150 |
HOIST UP |
25 |
26 |
29 |
26 |
26 |
28 |
26 |
26 |
HOIST DOWN |
13 |
17 |
17 |
17 |
21 |
23 |
21 |
21 |
WINCH ON |
27 |
26 |
29 |
26 |
26 |
28 |
26 |
26 |
WINCH OFF |
20 |
17 |
17 |
17 |
21 |
23 |
21 |
21 |
SUB-FRAME |
4” x 3” x 1/4” TUBE |
4” x 3” x 1/4” TUBE |
4” x 3” x 1/4” TUBE |
4” x 3” x 1/4” TUBE |
4” x 3” x 1/4” TUBE |
4” x 3” x 1/4” TUBE |
4” x 3” x 1/4” TUBE |
OPTIONAL |
TOP RAIL DIVIDER BAR |
N/A |
3/4” x 2-1/2” ALLOY STEEL |
N/A |
3/4” x 2-1/2” ALLOY STEEL |
N/A |
N/A |
3/4” x 2-1/2” ALLOY STEEL |
N/A |
WEIGHT (with Oil And Mounted) |
7,875 |
8,000 |
8,475 |
8,360 |
8,100 |
8,560 |
8,475 |
8,100 |
|
