No other hooklift manufacturer currently offers the flexability of the Flex36. The Flex36 can handle dump containers ranging from 8’ to 15’ and flatbeds ranging from 10’ to 16’ and has a lifting capacity of up to 16,000-pounds. It has a maximum dump angle of 50 degrees to 54 degrees, depending on the length of body.
- Standard in-cab manual controls which allow for precise metering of the manual hydraulic valve.
.
- Patented dump/load interface
.
- Hydraulic locks to prevent cylinder movement in case of pressure loss
.
- Mechanical rear body tie-down latches
.
- Resettable dump/tilt tabs
.
- Hydraulic rotary valve to prevent front tilt movement when the dump frame is raised
.
- Full length dump frame with front saddles to support the body during the dump mode
.
- DX pre-lubricated bushings used at pivot points
.
- Grease zerks at all pin points to allow purging of contaminates
.
- Greaseable load rollers
- Stainless steel pins used throughout
- Two-part polyurethane enamel
Item Description
Lifting / Dumping Cap.
Dump Angle
Effective Length
Cab to Axle
Shipping Weight
Rec. Body Lengths
Rec. Longest Flatbed
Hook Height
Min. Truck GVWR |
60-8
Up to 9,000
54 deg.
91”
60"11
1,275
8 ’ to 9'
To 10'
35.63”
10,500-15,000 |
84-10
Up to 16,000
53 deg.
115”
84” to 96"11
1,360
10’ to 12'
To 13'
35.63”
10,500-26,000 |
Item Description
Lifting / Dumping Cap.
Dump Angle
Effective Length
Cab to Axle
Shipping Weight
Rec. Body Lengths
Rec. Longest Flatbed
Hook Height
Min. Truck GVWR |
108-12
Up to 16,000
54 deg.
142”
108” to 120"11
1,615
12’ to 14'
To 15'
35.63”
10,500-26,000 |
120-14
Up to 16,000
50 deg.
151”
120” to 130"11
1,650
13’ to 15'
To 16'
35.63”
10,500-26,000 |
CLICK HERE FOR ADDITIONAL PRODUCT LITERATURE
|
